Namespaces

From cppreference.com
< cpp‎ | language

Namespaces provide a method for preventing name conflicts in large projects.

Symbols declared inside a namespace block are placed in a named scope that prevents them from being mistaken for identically-named symbols in other scopes.

Multiple declarations of namespaces with the same name are allowed, resulting in a namespace including all symbols from all such declarations.

Contents

[edit] Syntax

namespace ns_name { declarations } (1)
inline namespace ns_name { declarations } (2) (since C++11)
namespace { declarations } (3)
ns_name::name (4)
using namespace ns_name; (5)
using ns_name::name; (6)
namespace name = qualified-namespace ; (7)
1) Namespace definition for the namespace ns_name.
2) Inline namespace definition for the namespace ns_name. Declarations inside ns_name will be visible in its enclosing namespace.
3) Unnamed namespace definition. Its members have potential scope from their point of declaration to the end of the translation unit, and have internal linkage.
4) Namespace names (along with class names) can appear on the left hand side of the scope resolution operator, as part of qualified name lookup.
5) using-directive: From the point of view of unqualified name lookup of any name after a using-directive and until the end of the scope in which it appears, every name from namespace-name is visible as if it were declared in the nearest enclosing namespace which contains both the using-directive and namespace-name.
6) using-declaration: makes the symbol name from the namespace ns_name accessible for unqualified lookup as if declared in the same namespace as where this using-declaration appears.
7) namespace-alias-definition: makes name a synonym for another namespace: see namespace alias

[edit] Explanation

[edit] Namespaces

inline(optional) namespace identifier { namespace-body }
inline - if present, makes this an inline namespace (see below). Cannot appear on the extension-namespace-definition if the original-namespace-definition did not use inline
identifier - either a previously unused identifier, in which case this is original-namespace-definition or the name of a namespace, in which case this is extension-namespace-definition
namespace-body - possibly empty sequence of declarations of any kind (including class and function definitions as well as nested namespaces)

Namespace definitions are only allowed at namespace scope, including the global scope.

The namespace-body defines a namespace scope, which affects name lookup.

All names introduced by the declarations that appear within namespace-body (including nested namespace definitions) become members of the namespace identifier, whether this namespace definition is the original namespace definition (which introduced identifier), or an extension namespace definition (which "reopened" the already defined namespace)

A namespace member that was declared within a namespace body may be defined outside of it using explicit qualification

namespace Q {
  namespace V { // V is a member of Q, and is fully defined within Q
    class C { void m(); }; // C is a member of V and is fully defined within V
                           // C::m is only declared
    void f(); // f is a member of V, but is only declared here
  }
  void V::f() // definition of V's member f outside of V
              // f's enclosing namespaces are still the global namespace, Q, and Q::V
  {
      extern void h(); // This declares ::Q::V::h
  }
  void V::C::m() // definition of V::C::m outside of the namespace (and the class body)
                 // enclosing namespaces are the global namespace, Q, and Q::V
  {
  }
}

Out-of-namespace definitions are only allowed after the point of declaration, and only in the namespaces that enclose the original namespace (including the global namespace)

namespace Q {
  namespace V { // original-namespace-definition for V
    void f(); // declaration of Q::V::f
  }
  void V::f() {} // OK
  void V::g() {} // Error: g() is not yet a member of V
  namespace V { // extension-namespace-definition for V
    void g(); // declaration of Q::V::g
  }
}
namespace R { // not a enclosing namespace for Q
   void Q::V::g() {} // Error: cannot define Q::V::g inside R
}
void Q::V::g() {} // OK: global namespace encloses Q

Names introduced by friend declarations within a non-local class X become members of the innermost enclosing namespace of X, but they do not become visible to lookup (neither unqualified nor qualified) unless a matching declaration is provided at namespace scope, either before or after the class definition. Such name may be found through ADL which considers both namespaces and classes.

Only the innermost enclosing namespace is considered by such friend declaration when deciding whether the name would conflict with a peviously declared name.

void h(int);
namespace A {
  class X {
    friend void f(X); // A::f is a friend
    class Y {
        friend void g(); // A::g is a friend
        friend void h(int); // A::h is a friend, no conflict with ::h
    };
  };
  // A::f, A::g and A::h are not visible at namespace scope
  // even though they are members of the namespace A
  X x;
  void g() {  // definition of A::g
     f(x); // A::X::f is found through ADL
  }
  void f(X) {}       // definition of A::f
  void h(int) {}     // definition of A::h
  // A::f, A::g and A::h are now visible at namespace scope
  // and they are also friends of A::X and A::X::Y
}

Inline namespaces

An inline namespace is a namespace that uses the optional keyword inline in its original-namespace-definition.

Members of an inline namespace are treated as if they are members of the enclosing namespace in many situations (listed below). This property is transitive: if a namespace N contains an inline namespace M, which in turn contains an inline namespace O, then the members of O can be used as though they were members of M or N.

  • A using-directive that names the inline namespace is implicitly inserted in the enclosing namespace (similar to the implicit using-directive for the unnamed namespace)
  • In argument-dependent lookup, when a namespace is added to the set of associated namespaces, its inline namespaces are added as well, and if an inline namespace is added to the list of associated namespaces, its enclosing namespace is added as well.
  • Each member of an inline namespace can be explicitly instantiated or explicitly specialized as if it were a member of the enclosing namespace.
  • Qualified name lookup that examines the enclosing namespace will include the names from the inline namespaces even if the same name is present in the enclosing namespace.
{ // in C++14, std::literals and its member namespaces are inline
   using namespace std::string_literals; // makes visible operator""s 
                                         // from std::literals::string_literals
   auto str = "abc"s;
}
{
   using namespace std::literals; // makes visible both
                                  // std::literals::string_literals::operator""s
                                  // and std::literals::chrono_literals::operator""s
   auto str = "abc"s;
   auto min = 60s;
}
{
   using std::operator""s; // makes both std::literals::string_literals::operator""s
                           // and std::literals::chrono_literals::operator""s visible
   auto str = "abc"s;
   auto min = 60s;
}

Note: the rule about specializations allows library versioning: different implementations of a library template may be defined in different inline namespaces, while still allowing the user to extend the parent namespace with an explicit specialization of the primary template.

(since C++11)

[edit] Unnamed namespaces

The unnamed-namespace-definition is a namespace definition of the form

inline(optional) namespace { namespace-body }

This definition is treated as a definition of a namespace with unique name and a using-directive in the current scope that nominates this unnamed namespace.

namespace {
    int i;  // defines ::(unique)::i
}
void f() {
    i++;  // increments ::(unique)::i
}
 
namespace A {
    namespace {
        int i; // A::(unique)::i
        int j; // A::(unique)::j
    }
    void g() { i++; } // A::unique::i++
}
 
using namespace A; // introduces all names from A into global namespace
void h() {
    i++;    // error: ::(unique)::i and ::A::(unique)::i are both in scope
    A::i++; // ok, increments ::A::(unique)::i
    j++;    // ok, increments ::A::(unique)::j
}

Unnamed namespaces as well as all namespaces declared directly or indirectly within an unnamed namespace have internal linkage, which means that any name that is declared within an unnamed namespace has internal linkage by default. Even if some name in an unnamed namespace is declared with external linkage (e.g. with extern), it is never accessible from other translation units because its namespace name is unique.

[edit] Using-declarations

Introduces a name that is defined elsewhere into the declarative region where this using-declaration appears.

using typename(optional) nested-name-specifier unqualified-id ; (1)
using :: unqualified-id ; (2)
nested-name-specifier - a sequence of names and scope resolution operators ::, ending with a scope resolution operator. A single :: refers to the global namespace.
unqualified-id - an id-expression
typename - the keyword typename may be used as necessary to resolve dependent names, when the using-declaration introduces a member type from a base class into a class template

Using-declarations can be used to introduce namespace members into other namespaces and block scopes, or to introduce base class members into derived class definitions.

For the use in derived class definitions, see using declaration.

Names introduced into a namespace scope by a using-declaration can be used just like any other names, including qualified lookup from other scopes:

void f();
namespace A {
    void g();
}
namespace X {
    using ::f; // global f is now visible as ::X::f
    using A::g; // A::g is now visilbe as ::X::g
}
void h()
{
    X::f(); // calls ::f
    X::g(); // calls A::g
}

If, after the using-declaration was used to take a member from a namespace, the namespace is extended and additional declarations for the same name are introduced, those additional declarations do not become visible through the using-declaration (in contrast with using-directive). One exception is when a using-declaration names a class template: partial specializations introduced later are effectively visible, because their lookup proceeds through the primary template.

namespace A {
    void f(int);
}
using A::f; // ::f is now a synonym for A::f(int)
 
namespace A { // namespace extension
   void f(char); // does not change what ::f means
}
void foo() {
    f(’a’); // calls f(int), even though f(char) exists.
} 
void bar() {
   using A::f; // this f is a synonym for both A::f(int) and A::f(char)
   f(’a’); // calls f(char)
}

Using-declarations cannot name template-id, namespace, or a scoped enumerator. Each using-declaration introduces one and only one name, for example using-declaration for an enumeration does not introduce any of its enumerators.

All restrictions on regular declarations of the same names, hiding, and overloading rules apply to using-declarations:

namespace A {
    int x;
}
namespace B {
    int i;
    struct g { };
    struct x { };
    void f(int);
    void f(double);
    void g(char); // OK: function name g hides struct g
}
void func() {
    int i;
    using B::i; // error: i declared twice
 
    void f(char);
    using B::f; // OK: f(char), f(int), f(double) are overloads
    f(3.5); // calls B::f(double)
 
    using B::g;
    g(’a’);      // calls B::g(char)
    struct g g1; // declares g1 to have type struct B::g
 
    using B::x;
    using A::x;  // OK: hides struct B::x
    x = 99;      // assigns to A::x
    struct x x1; // declares x1 to have type struct B::x
}

If a function was introduced by a using-declaration, declaring a function with the same name and parameter list is ill-formed (unless the declaration is for the same function). If a function template was introduced by a using-declaration, declaring a function template with the same name, parameter type list, return type, and template parameter list is ill-formed. Two using-declarations can introduce functions with the same name and parameter list, but if a call to that function is attempted, the program is ill-formed.

namespace B {
    void f(int);
    void f(double);
}
namespace C {
    void f(int);
    void f(double);
    void f(char);
}
void h() {
    using B::f; // introduces B::f(int), B::f(double)
    using C::f; // introduces C::f(int), C::f(double), and C::f(char)
    f(’h’);      // calls C::f(char)
    f(1);        // error: B::f(int) or C::f(int)?
    void f(int); // error: f(int) conflicts with C::f(int) and B::f(int)
}

[edit] Using-directives

A using-directive is a block-declaration with the following syntax:

attr(optional) using namespace nested-name-specifier(optional) namespace-name ; (1)
attr(C++11) - any number of attributes that apply to this using-directive
nested-name-specifier - a sequence of names and scope resolution operators ::, ending with a scope resolution operator. A single :: refers to the global namespace.
namespace-name - a name of a namespace. When looking up this name, lookup considers namespace declarations only

Using-directives are allowed only in namespace scope and in block scope. From the point of view of unqualified name lookup of any name after a using-directive and until the end of the scope in which it appears, every name from namespace-name is visible as if it were declared in the nearest enclosing namespace which contains both the using-directive and namespace-name.

Using-directive does not add any names to the declarative region in which it appears (unlike the using-declaration), and thus does not prevent identical names from being declared.

Using-directives are transitive for the purposes of unqualified lookup: if a scope contains a using-directive that nominates a namespace-name, which itself contains using-directive for some namespace-name-2, the effect is as if the using directives from the second namespace appear within the first. The order in which these transitive namespaces occur does not influence name lookup.

namespace A {
    int i;
}
namespace B {
    int i;
    int j;
    namespace C {
        namespace D {
            using namespace A; // all names from A injected into global namespace
            int j;
            int k;
            int a = i; // i is B::i, because A::i is hidden by B::i
        }
        using namespace D; // names from D are injected into C
                           // names from A are injected into global namespace
        int k = 89; // OK to declare name identical to one introduced by a using
        int l = k;  // ambiguous: C::k or D::k
        int m = i;  // ok: B::i hides A::i
        int n = j;  // ok: D::j hides B::j
    }
}

If, after a using-directive was used to nominate some namespace, the namespace is extended an additional members and/or using-directives are added to it, those additional members and the additional namespaces are visible through the using-directive (in contrast with using-declaration)

namespace D {
   int d1;
   void f(char);
}
using namespace D; // introduces D::d1, D::f, D::d2, D::f,
                   //  E::e, and E::f into global namespace!
 
int d1; // OK: no conflict with D::d1 when declaring
namespace E {
    int e;
    void f(int);
}
namespace D { // namespace extension
    int d2;
    using namespace E; // transitive using-directive
    void f(int);
}
void f() {
    d1++; // error: ambiguous ::d1 or D::d1?
    ::d1++; // OK
    D::d1++; // OK
    d2++; // OK, d2 is D::d2
    e++; // OK: e is E::e due to transitive using
    f(1); // error: ambiguous: D::f(int) or E::f(int)?
    f(’a’); // OK: the only f(char) is D::f(char)
}

[edit] Notes

The using-directive using namespace std; at any namespace scope introduces every name from the namespace std into the global namespace (since the global namespace is the nearest namespace that contains both std and any user-declared namespace), which may lead to undesirable name collisions. This, and other using directives are generally considered bad practice at file scope of a header file.

[edit] Example

This example shows how to use a namespace to create a class that already has been named in the std namespace.

#include <vector>
 
namespace vec {
 
    template< typename T >
    class vector {
        // ...
    };
 
} // of vec
 
int main()
{
    std::vector<int> v1; // Standard vector.
    vec::vector<int> v2; // User defined vector.
 
    v1 = v2; // Error: v1 and v2 are different object's type.
 
    {
        using namespace std;
        vector<int> v3; // Same as std::vector
        v1 = v3; // OK
    }
 
    {
        using vec::vector;
        vector<int> v4; // Same as vec::vector
        v2 = v4; // OK
    }
 
    return 0;
}


[edit] See also

namespace alias creates an alias of an existing namespace